4 Common Garage Door Problems and How They’re Fixed

1829

As a home dweller, you no doubt understand how vital the garage door is to your home. It’s how you get in and out of your building, get your car in and out of your home, get your groceries in, and access your garage for work and profit. It’s important to know what to do when something goes wrong.

The good news is there are several common garage door problems that you can solve. You can get your garage door up and running with the proper information and access to professionals.

We’re here to help you do exactly that.

1. Noisy Garage Door Parts

Advertisement

Noisy garage door parts are a regular garage door problem. Over time, or from improper installation or maintenance, parts may start to squeak and rattle, leading to a loud garage door. This noise can be very annoying, especially when trying to sleep or if the garage is near a bedroom.

Fortunately, there are solutions to fix loud garage door parts. The first option is to lubricate all moving parts.

You can use a silicone-based lubricant on all the hinges and other metal-moving sections. If lubrication does not fix the problem, then more major repairs may be necessary.

2. Jammed Garage Door Rollers

Garage doors rely on rollers and tracks to ensure their operation is as smooth as possible. Unfortunately, these occasionally get jammed, making it impossible to open or close the door.

Jammed garage door rollers are a common problem. It’s because of dirt, debris, or corrosion accumulated on the rollers or track.

To fix the problem, the door must be opened and the offending object removed. The roller and track may need replacement if the problem is due to wear and tear.

3. Faulty Wiring and Sensor Issues

Faulty wiring and sensor issues are problems with garage door systems. The problems can range from poor reception of the remote control commands to issues with the roller limits, to the opener struggling to detect the closing/opening signal from the sensors.

These problems are usually caused by poor cable connections, damaged wire insulation, and incorrect wiring. To fix this issue, this garage door repair company can provide an electrician who must check the wiring cables and sensors to ensure they are correctly connected and in good condition. The electrician will then replace the damaged wiring and reset the opener for correct operation.

4. Broken Spring

Broken springs in garage doors are a common problem. Repairing them can be a difficult and hazardous task. The springs balance and help support the weight of the door, so when they break and become overstretched, the repair must be done promptly.

Most springs will last about 10,000 cycles. You notice the problem when you hear a loud snapping noise from the spring when it breaks.

To fix the broken spring, a technician must loosen the set screws that attach the spring and the pulley, then remove the broken spring and install the new spring in its place.

Once the new spring is in place, the technician must adjust the tensioning of the springs so that the door is balanced and the springs will always be at the same tension.

Follow This Guide to Troubleshoot Garage Door Problems

You can handle convenient garage door repairs quickly and easily without much time or effort. You can fix common garage door problems through troubleshooting and simple adjustments or repairs.

If you’re having an issue with your garage door, contact a professional today to help diagnose and repair the problem.

Did our article help you? Please keep browsing our site for more helpful tips and advice.